Headlight adjustment - easy way

The picture shows what manual says about beam adjustment. My advise is: forget it, it's much easier if you do not try to "move aside the dash panel" (a task which requires two bottles of beer). Those adjustment screws shown in the picture are actually quite easily accessible with a suitable length screwdriver, through a gap between the front fairing and the fork. You can just sit on the saddle, move the fork a bit and feel your way with a screwdriver and start adjusting. Easy job.

Another catch here is that if you want to adjust the beam in up/down direction, you do not touch the vertical adjustment screws (number 1 in picture), but instead turn the screws number 2. Trust me, I've been there twice.